%20(1).png)
NPS05
The PAXModular IP-Intercom NPS05 is designed for manual announcements, especially at airport gates. The IP station can be connected directly to the airport’s existing IT network, eliminating the need for dedicated cabling.
Audio data as well as control commands are transmitted via IP.
All keys can be assigned individually. The station is available with 16 button keypads.
CPS03
The PAXModular IP Call Station CPS03 is designed for manual announcements, especially at airport gates. It can be connected directly to the airport’s existing IT network and does not require dedicated cabling.
Audio data as well as control commands are transmitted via IP. Redundancy can be ensured by operating over 2 separate servers. The call station can have 4 or 8 buttons.
FWST
The PAXModular IP intercom FWST with touch panel was developed for manual announcements, especially at airport gates and fire stations. It can be connected directly to the airport’s existing IT network and does not require its own cabling.
With the PAX server process, the paging station communicates via UDP and the audio is transmitted using PCM multicast/unicast.
AES67-IO
The PAXModular series includes several 19″ 1U devices for amplifier and line monitoring of multi-channel audio amplifiers in 100V technology.
The PAXModular AES67-IO is used for simultaneous reception of multiple AES67 compatible audio streams. These are upgraded via two CODEC devices and converted to analog signals.
PAXController
The PAXModular PAXController can be used either as a central control head of PAX systems or as a gateway between PA systems of different manufacturers and the PAX system.
The 19″-1U housing is designed with a shortened installation depth for mounting in the swing frame. The power supply is redundantly led out. The supply voltage range goes from 18 – 28V DC and is thus optimal for emergency power operation with the higher-level control.
